Gemakkelijk te installeren, in bedrijf te stellen en te bedienen
Vermindert de bedrijfskosten
Verhoogt de energie-efficiëntie in verwarmings- en koelsystemen
TTM NoXygen® C6100 Modbus Vacuum degasser
Adapted for high system pressures (up to 10 bar)
TTM NoXygen® C6100 is a fully automatic vacuum degasser for heating and cooling systems that can be connected for control, regulation and monitoring via Modbus RTU. Energy losses, corrosion and sound problems in the systems are mainly caused by a high gasconcentration in the system fluid.
TTM NoXygen® C6100 prevents above stated problems by using an effective method that keeps the system free of gases that gives higher energy efficiency, lower maintenance cost and longer lifetime of the system components.
TTM NoXygen® can be installed in both existing and new systems.
TTM NoXygen® is environmentally assessed according to a Swedish Standard.
Installation benefits:
- Easy to install, commission and control
- Quick degassing function
- Can be installed in both small and large systems.
Operational benefits:
- Reduces operating costs
- Prevents corrosion of system components
- No need to vent radiators
- Increases energy efficiency of heating and cooling systems
- Minimises noise problems in heating and cooling systems
- Stable and easy adjustment
- Removes gases from the system fluid
- Prevents degradation of refrigerant liquids.
- The automation for control, regulation and monitoring is connected via Modbus-RTU.
NoXygen®-programma:
Lees meer over:
Documentatie:
Operating principle
TTM NoXygen® removes trapped and free gases in heating, heat recovery or cooling systems by reducing the system pressure to -0.9 bar. Trapped gases in the system fluid are released with a significant pressure reduction, forming free gas bubbles that can then be vented out. Venting is completely independent of the existing system pressure or the temperature of the medium.
When the TTM NoXygen® is installed for the first time, the unit automatically starts in fast venting mode. This means that the TTM NoXygen® quickly reduces the gas content of the system and then switches to maintenance venting once the gases have been removed.
The negative pressure deaerator is intended for permanent installation to keep the system free of free and bound gases in the long term. At the end of the process, the gas content of the system will gradually increase, as no liquid systems are completely diffusion-tight. If the system ever needs to be drained of liquid, the new system liquid will be efficiently vented through the unit’s fast venting mode.
| Description: | Specification: |
|---|---|
| Art. no. | 519461 |
Connection to DUC: | Modbus RTU (RS485) |
Working range, system pressure at connection point: | Min 4 bar Max 10 bar |
PS, maximum permissible pressure at connection point: | 13 bar |
| Capacity, degassed fluid : | Min. 135 l/h |
| Vacuum capacity during degassing: | Tot -0.9 bar |
| Pressure class | PN 10 |
Media temperatur: | 0 – +70 °C |
Ambient temperature: | 0 – +40°C |
Capacity, degassed fluid: | Min. 250 l/h |
Vacuum capacity during degassing: | Tot -0.9 bar |
Media: | Water and deionised water |
Internal fuse: | 10 A |
Connection dimension: | R15 (G1/2) m |
Electrical data: | 1,5 kW |
Nominal power: | 3 x 400V, 50 Hz |
Nominal current: | 3,14 A |
Alarm output, max load: | 24 V, 1,0 A |
Energy usage: | 56 kWh/year. Operation with 30 days of quick degassing results in an energy consumption of 199 kWh the first year. |
Class of protection: | IP44 |
Noise Level: | 61 DB |
Measure (WxHxD) mm: | 600 x 1150 x 350 |
Weight: | 60 kg |
TTM NoXygen® may be installed in
disturbance sensitiveenvironments such as
hospitals, offices and industries.
TTM Connection hose package
PN16 - R15 (G½)
PN16 - R15 (G½)
The package contains 2 hoses of 1500 mm length/pc. Two connection nipples with gaskets are included for each hose.
Art. no: 519775
TTM MAG 76
Magnetietvanger met korffilter. Bedoeld om te installeren met TTM NoXygen® maar kan ook gebruikt worden in minder vervuilde systemen zonder ontgassing. Beschermt de ontgasser en verlengt de levensduur van het systeem.
Simonsland in Borås
Wanneer Kanico een nieuwe wijk in Borås ontwikkelt, is TTM verantwoordelijk voor de shuntgroepen in de HVAC-systemen. Het gebied heet Simonsland en omvat 60.000 vierkante meter aan gebouwen.
Operagebouw Kopenhagen
Het Operahuis van Kopenhagen heeft een oppervlakte van 41.000 vierkante meter, 14 verdiepingen, met 6 podia, een hoofdpodium voor ongeveer 1.500 toeschouwers en 5 podia voor repetities en voorbereidingen.
Kantoorgebouw in Solna
NCC bouwt zijn nieuwe hoofdkantoor op Järva Krog in Solna. Het nieuwe hoofdkantoor zal strategisch gelegen zijn op een gemakkelijk bereikbare locatie dicht bij de E4-snelweg.