Slide






FLUID TREATMENT - TTM NOXYGEN® AND TTM MAG
SHUNT UNITS - TTM SHUNTOPAC®
Hem » Shunt-units » Shuntopac pregefabriceerde shuntgroepen » Shuntopac Shuntgroep warteterugwinning » Shuntopac U 20-50 VÅ
Shuntopac® U 20-50 VÅ is een shuntgroep voor warmteterugwinsystemen en is standaard leverbaar met aansluitmaten van DN 20 tot en met DN 50. De shuntgroep kan worden uitgerust met meerdere componenten van elk merk en een aantal verschillende aansluitingen opties. Aansluiting primaire en secundaire zijde direct van bovenaf.
Shuntopac® U 20-50 VÅ wordt geleverd met een brand- en corrosiebestendige afdekking van polyester gecoate aluminiumplaat. De isolatie bestaat standaard uit AF / Armaflex AF-4.
De ophanginrichting bestaat uit beugels van geel gechromateerd stijltang.
Het buizenpakket bestaat uit een standaard uitvoering van volledig gelaste drukvatbuizen SS-EN 10216-2 en DIN 2391, roestwerend gelakt met grijze primer. Leidingpakketten in een andere kwaliteit of met een andere oppervlaktebehandeling kunnen op bestelling geleverd worden.
Shuntopac® U 20-50 VÅ is CE-gemarkeerd in overeenstemming met verklaring van de fabrikant 2B volgens de Machinerichtlijn.
De shuntgroep is ecologisch beoordeeld.
1. Control valve
Seat valve with threaded connection in a choice of make and type. The valve is installed in a flange joint to facilitate servicing and replacement.
2. Thermometers4 pcs, graduated -40 – +40 °C. Installed with silicon thermal transfer paste.
3. Shut-off valves
3 pcs ball valves with full throughflow and extended stem. Installed on pipe package with conical coupling.
4. Adjustment valve
1 pc in a choice of make and dimension for adjustment of total flow. Installed on pipe package with conical coupling. Make: TA STAD supplied as standard.
5. Pump
Choice of make and type with “wet” or “dry” motor.
6. Adjustment valve
1 pc TA STAD for adjustment of bypass flow.
7. Drainage
Version with hose screw connection R 1/2”.
8. Test sockets
Type TA STAD, installed on all connections.
Special design
Options
Adjustment
Total flow
1. Connect differential pressure instrument to adjustment valve with measuring point.
2. Set the control valve to fully open position (stem depressed, bypass closed).
3. Measure the water until it reaches the calculated value.
Bypass flow
4. Set the control valve to fully closed position (stem up, bypass open).
5. Adjust the inner adjustment valve until the outer adjustment valve achieves the same pressure drop as before.
All outside valves on the TTM Shuntopac® U 20-50 VÅ are provided with test sockets, allowing complete differential pressure measurement.
B – C Pressure drop in supply air circuit.
H – D Pressure drop in exhaust air circuit.
D – E Head over circulation pump.
C – G Pressure drop over control valve.
F – H Differential pressure measurement over adjustment valve in exhaust air circuit.
Connection DN | 20 | 25 | 32 | 40 | 50 |
---|---|---|---|---|---|
A | 750 | 750 | 750 | 750 | 845 |
B | 485 | 485 | 485 | 485 | 665 |
C | 285 + pump | 285 + pump | 285 + pump | 285 + pump | 305 + pump |
D | 200 | 200 | 200 | 200 | 225 |
E | 200 | 200 | 200 | 200 | 225 |
F | 200 | 200 | 200 | 200 | 225 |
G | 67.5 | 67,5 | 67.5 | 67.5 | 75 |
H | 182 | 182 | 182 | 182 | 261 |
I | <175 | <193 | <200 | <205 | <245 |
J | 800 + pump | 800 + pump | 800 + pump | 800 + pump | 1050 + pump |
K | 93 | 93 | 93 | 93 | 114 |
L | Space for actuators, assembly and maintenance. | Space for actuators, assembly and maintenance. | Space for actuators, assembly and maintenance. | Space for actuators, assembly and maintenance. | Space for actuators, assembly and maintenance. |
Weight, approx. kg | 32 | 37 | 52 | 57 | 62 |
Max. pressure: 1,0 MPa
Temp. range: -20 – +110 °C
Specified dimensions are valid for the standard version. Some variations may occur if alternative equipment is used.
Constant flow in exhaust air heat exchanger circuit.
Variable flow in supply air heat exchanger circuit.
The control valve is installed as a mixing valve.
01 VÅ
02 VÅ
Wanneer Kanico een nieuwe wijk in Borås ontwikkelt, is TTM verantwoordelijk voor de shuntgroepen in de HVAC-systemen. Het gebied heet Simonsland en omvat 60.000 vierkante meter aan gebouwen.
Het Operahuis van Kopenhagen heeft een oppervlakte van 41.000 vierkante meter, 14 verdiepingen, met 6 podia, een hoofdpodium voor ongeveer 1.500 toeschouwers en 5 podia voor repetities en voorbereidingen.
NCC bouwt zijn nieuwe hoofdkantoor op Järva Krog in Solna. Het nieuwe hoofdkantoor zal strategisch gelegen zijn op een gemakkelijk bereikbare locatie dicht bij de E4-snelweg.
TTM-Benelux B.V.
Beukenhof 8
8332VA Steenwijk
The Netherlands
Tel. +31 (0)85 082 55 30
info@ttm-benelux.nl
TTM-Benelux B.V.
info@ttm-benelux.nl
Vat. NL8631.49.522.B.01
© Copyright 2022 TTM Energiprodukter AB