Slide






FLUID TREATMENT - TTM NOXYGEN® AND TTM MAG
SHUNT UNITS - TTM SHUNTOPAC®
TTM Energiprodukter heeft een breed assortiment aan geprefabriceerde shuntgroepen voor verwarming, koeling en warmteterugwinning en het combineren van shuntgroepen die twee of meer van deze functies bevatten. Door te kiezen voor een Shuntopac shuntgroep krijgt u een correct gedimensioneerde en goed functionerende shuntfunctie in uw instelling. Het bereik wordt weergegeven onder elk shunttype.
Alle shuntgroepen die gedimensioneerd en berekend zijn, zijn voorzien van een productcode die het ontwerp en de technische specificaties beschrijft. De betekenis van de code vindt u onder “codesjablonen”.
Al onze shuntgroepen zijn milieutechnisch beoordeeld.
Hem » Shunt-units » Shuntopac pregefabriceerde shuntgroepen » Shuntopac Shuntgroep verwarming » Shuntopac EM
Shuntopac EM is een categorie van shuntgroepen uitgerust met energiemeetapparatuur van het ultrasone type volgens: EN 1434 klasse 2 en MID 2004/22/EG.
De geïntegreerde energiemeter registreert het energieverbruik in het aangesloten regelobject en meetwaarden worden opgeslagen en op afstand uitgelezen.
Shuntopac EM is een compacte en kosteneffectieve oplossing wanneer individuele energiemeting op jachtgroepen gewenst is. De levering is compleet met alle benodigde functies. Shuntopac EM wordt standaard geleverd met alle aansluitingen naar boven gericht.
1. Control valve
Can be supplied with or without actuator for desired voltage and signal.
2. Adjustment
valve primary side in a choice of make and dimension, installed on pipe package with conical coupling. Standard delivery: IMI/TA STAD/F. Control valve is supplied with dynamic adjustment valve or differential pressure controller.
1 pc in choice of make and dimension for adjustment and control of the flow in the shunt primary side.
In the “Dynamic” version, the adjustment valve is an extra accessory. In the standard version, this is replaced with a shut off valve.
3. Adjustment valve secondary side.
For control measurement of the flow in the secondary circuit. 1 pc adjustment valve in a choice of make and dimension for adjustment and control of the flow in the shunt secondary side.
4. Pump
Choice of make and type with “wet” or “dry” motor.
5. Measuring point
Type IMI/TA STAD/F, installed on all connections so complete pressure measurements can be carried out.
6. Shut-off valves
Ball valves in dimensions DN 20 to DN 50 with: full throughflow, extended stem or butterfly valve DN 65 to DN 200, designed to function as end valves on the shunt unit. Installed on pipe package with conical coupling or flanges. For environmental reasons, the ball valves are manufactured of brass containing a maximum of 0.2% lead.
7. Thermometers
Graduated 0 – +120 °C for heating and -40 – +40 °C for cooling.
8. Drain plug
with hose screw connection R 1/2” in all low points.
9. Rating plate and flow diagram
10. Energy meter
Siemens UH50 is supplied as standard, either for battery operation or for 230 V. Ultrasound flow meter Qp 0.6 to 60 m3/h. Communication model according to requirements.
For other technical data, see the corresponding Shuntopac standard model.
All external valves on TTM Shuntopac® 20-50 EM are equipped with measurement outlet, allowing complete differential pressure measurement.
B – A Measuring of the pressure difference over the adjusting valve on the primary side. Primary flow can be determined with the help of data for the adjusting valve.
C – A Available pressure difference on primary side.
G – H Pressure rise over the circulation pump.
H – D Pressure drop in connected object on secondary side.
D – E Measuring of the pressure difference over the adjusting valve on the secondary side.
Secondary flow can be determined with the help of data for the adjusting valve.
F – B Pressure drop over the control valve.
09
10
Gemaakt van epoxy gecoate RHS buizen 50 × 30 mm. Gedetailleerde montage-instructies zijn beschikbaar op www.ttm-benelux.nl (Shuntopac / accessoires)
Wanneer Kanico een nieuwe wijk in Borås ontwikkelt, is TTM verantwoordelijk voor de shuntgroepen in de HVAC-systemen. Het gebied heet Simonsland en omvat 60.000 vierkante meter aan gebouwen.
Het Operahuis van Kopenhagen heeft een oppervlakte van 41.000 vierkante meter, 14 verdiepingen, met 6 podia, een hoofdpodium voor ongeveer 1.500 toeschouwers en 5 podia voor repetities en voorbereidingen.
NCC bouwt zijn nieuwe hoofdkantoor op Järva Krog in Solna. Het nieuwe hoofdkantoor zal strategisch gelegen zijn op een gemakkelijk bereikbare locatie dicht bij de E4-snelweg.
TTM-Benelux B.V.
Beukenhof 8
8332VA Steenwijk
The Netherlands
Tel. +31 (0)85 082 55 30
info@ttm-benelux.nl
TTM-Benelux B.V.
info@ttm-benelux.nl
Vat. NL8631.49.522.B.01
© Copyright 2022 TTM Energiprodukter AB